1.LOADING PAPER
32 Loading Paper on the MPT
Tab paper on the MPT
You can print on the tab extension of tab paper. For acceptable tab paper, refer to the
Specifications Guide
.
1
Move the paper holding lever toward the outside. Place paper with its print side down on the
MPT.
Place the tab paper with the tab outside.
2
Align the side guides to the paper length. Move the paper holding lever toward the equipment.
When paper is placed, the menu for MPT settings appears.
There is no affect on the printing quality though noise may occur during paper feeding depending on the paper
type.
3
Check that there is no gap between the paper and the side guides.
If the gap is too wide, it could cause paper jamming, or the paper size could not be correctly detected.
Between the paper and side guides (“A” in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
jamming occurs, make a gap.
4
Specify the paper size during the operation for printing.
For details for the operation for printing, refer to the
Printing Guide
.
A
A
