ES3640e MFP User’s Guide
Appendix F – Scanner unit setup details - 201
Administrator setup
NOTE
The Administrator password is required.
Press the Administrator Setup button (6) to gain access to the
following:
>
Power Save Mode
Enable/disable power save mode.
>
Password for Administrator
Set MFP administrator password. The default is “”.
>
Access Control
Enable/disable PIN (Personal Identification Number)
authentication. If the PIN authentication is enabled, each
user is authenticated by the last 4 digits of ID for Job
Accounting. The PIN is provided by the Job Accounting
Utility.
>
Scan to E-Mail
Enable/disable SCAN TO E-MAIL.
>
Scan to FTP
Enable/disable SCAN TO FTP.
>
Proxy Settings
>
Server Name: Set FTP proxy server name or IP
address.
>
User Name: Set user name for the proxy server.
>
Port Number: Set port number of the proxy server.
>
LDAP Settings
>
Server Name: Set LDAP server name or IP address.
>
Port Number: Set the port number of LDAP.
>
Timeout: Set the time out in seconds (10 – 120sec) for
the search.
>
Max. Entries: Set the maximum number of E-Mail
addresses that the MFP unit can receive in each search.
The Clear button resets this value to the default.