4
English
type. Contact an electrician to have the outlet replaced. Do
not use an adapter to defeat the grounding.
• Install the printer near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it
or place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with the
printer, make sure that the total of the amperes required by
all the equipment on the extension is less than the
extension’s rating. The total ratings of all equipment
plugged into the outlet should not exceed 15 amperes.
• Do not poke anything into the ventilation slots of the
printer. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.
• Aside from the routine maintenance described in the
documentation, do not try to service the printer yourself.
Removing the cover may expose you to shocks or other
hazards.
• Do not make any adjustments other than those outlined in
the documentation. You may cause damage that will
require extensive repair work. The provided
documentation explains how to get your printer serviced
by qualified Oki Data technicians.
If anything happens that indicates that your printer is not
working properly or has been damaged, unplug it
immediately and follow the procedures in the provided
documentation for having your printer serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the printer, or the printer has
been exposed to water.
• The printer has been dropped, or the cabinet is damaged.
• The printer does not function normally when you are
following the operating instructions.
Material Safety Data Sheet (MSDS)
#58357306
for Black Toner, P/N 52115101
Contact Information ____________________
For more information, contact Oki Data at: 2000 Bishops
Gate Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information
: call 1-800-654-3282; US and
Canada only.
Applicable Products ____________________
Executive Series 1220n
Emergency First Aid Procedures__________
Toner swallowed (ingested)
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out mouth
and give one or two glasses of water or milk to drink.
Toner inhaled.
Remove person to fresh air. Seek medical attention.
Toner gets in the eyes.
Flush eyes with large quantities of cool water for 15
minutes, keeping the eyelids open with fingers. If necessary,
seek medical attention.
Toner gets on the skin.
Wash toner off the skin with plenty of cool water and soap.
If necessary, seek medical attention.
Note:
Small amounts of toner on skin or clothing can easily
be removed with soap and
cold
water. Hot water
makes toner harder to remove.
Hazardous Ingredients __________________
Carbon Black (about 4% by weight)
CAS# Confidential.
OSHA PEL: Not established.
ACGIH TLV Not established.
LD
50
: Not available.
LC
50
: Not available.
Silica dioxide (about 2% by weight)
CAS# Confidential.
OSHA PEL: Not established.
ACGIH TLV Not established.
LD
50
: Not Available.
LC
50
: Not Available.
Physical Data___________________________
Physical State:
Solid.
Melting/Freezing Point:
Not available.
Boiling Point:
Not available.
pH:
Not available.
Vapor Pressure:
Not available.
