Oki C7500 V2, Network Manual

Page: 19 / 107

Network Configuration 19
SNMP Tab
This allows you to configure SNMP related items.
Location Comments
Authentic
Community This community name is used to check whether incoming SNMP
requests have the correct community name or not. The community
name is displayed as ****** for security reasons.
TRAP Community This community name is assigned to outgoing system traps such as
cold start, authentication failure, etc.
TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap
is disabled.
SysContact Set SysContact (printer manager) name.
SysName Set SysName (printer model name).
SysLocation Set SysLocation (the location where the printer is installed).
Default TTL Set TTL (Time To Live) value.
Enable Authentic
Trap Set Authentic Trap to enabled/disabled.