manualshive.com logo in svg

Oki C7400, Maintenance Manual

Share
Download
Oki C7400 Maintenance Manual Download Page 99

41316401TH  Rev.9

99 /

Oki  Data  CONFIDENTIAL

Table 5-1-1  Operator Alarms (5/5)

Load *** Papers
490: No paper in
the MP Tray
(*** = A4, B5 etc.)

The specified cassette 
has no paper or is
removed. Or, the
cassette be ingused for 
printing has no more
paper.

1) No paper in MT?

2) Does the Paper out sensor operate 
    normally?

Yes

No

Load papers in MT.

Replace the Paper out sensor.

Load *** Papers
491~495: No
paper in the Tray
*
(*** = A4, B5 etc.)

No paper in the
Cassette 1, 2, 3, 4 or 5 
detected.

1) No paper in the specified cassette?

2) Does the Paper out sensor operate 
    normally?

Yes

No

Load papers in the specified cassette.

Replace the Paper out sensor of the 
specified cassette.

Replace Belt

The belt counter has 
reached the life value.

1) Is the error message displayed?

2) Does the error occur soon after Belt unit 
    replacement?

Yes

No

Check the belt life.

Replace the Belt unit immediately or at 
the next maintenance.

Replace Fuser

The fuser counter has 
reached the lifevalue

1) Is the error message displayed?

2) Does the error occur soon after
    Fuser unit replacement?

Yes

No

Check the fuser life.

Replace the Fuser unit immediately or 
at the next maintenance.

Job Offset Home
Error

The Job offset assy 
does not operate or 
cannot  detect the 
home position.

Does the Job offset assy operate normally? Yes

No

Replace the Job offset sensor.

Replace the Job offset motor or Engine
board.

Running Short of
Paper in Tray *

Running short of  paper 
detected

Does only small mount of papers
(approx. 30 sheets or less) remain?

Yes

No

Load papers.

Check the Paper near end sensor.

Disc Operation
Error

HDD cannot be written. Is the operating procedure correct?

No

Yes

Confirm the procedure in the manual.

Replace the HDD as it is broken.

Message

Cause

Error Description

Solutions

Summary of Contents for C7400















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands