Oki C7400, Maintenance Manual

Page: 88 / 174

41316401TH Rev.9
88 /
Oki Data CONFIDENTIAL
3.1.3.1 Short plug settings
The SWA board has two short plugs that can be set as follows:
Short Plug (WE1)
Sets flash ROM DIMM to connect WE signals.
(1-2 Short: Disconnects WE signals; 2-3 Short: Connects WE signals.)
Factory 2-3 Short Setting: Re-programmable flash ROM DIMM.
Short Plug (WE2)
(Not use)
3.1.3.2 Printings singly using controller-equipped printer
Menu Map Printing
The program versions, the controller block configuration and other configurations and settings
of the printer are printed.
Operation:
(Press of Switches)
Without HDD: “0”
→
“3”
→
“3”
With HDD: “0”
→
“0”
→
“3”
→
“3”
File List Printing
A list of files stored on a HDD or in ROM is printed.
Operation:
(Press of Switches)
Without HDD: “0”
→
“3”
→
“1”
→
“3”
With HDD: “0”
→
“0”
→
“3”
→
“1”
→
“3”
Font List Printing (PCL)
A list of PCL fonts is printed.
Operation:
(Press of Switches)
Without HDD: “0”
→
“3”
→
“1”
→
“1”
→
“3”
With HDD: “0”
→
“0”
→
“3”
→
“1”
→
“1”
→
“3”
Font List Printing (PS)
A list of PS fonts is printed.
Operation:
(Press of Switches)
Without HDD: “0”
→
“3”
→
“1”
→
“1”
→
“1”
→
“3”
With HDD: “0”
→
“0”
→
“3”
→
“1”
→
“1”
→
“1”
→
“3”
Demo Printing
The demo patterns for destinations stored in ROM are printed.
Operation:
(Press of Switches)
Without HDD: “0”
→
“3”
→
“1”
→
“1”
→
“1”
→
“1”
→
“3”
With HDD: “0”
→
“0”
→
“3”
→
“1”
→
“1”
→
“1”
→
“1”
→
“3”
Ethernet Board Self-Diagnostic Printing
When the printer is equipped with an Ethernet board, holding down the SW on the Ethernet
board for two seconds or more runs self-diagnostics and prints its result.