Oki C7400 Maintenance Manual Download

Page: 101 / 174

41316401TH Rev.9

101 /

Oki Data CONFIDENTIAL

The printer does not operate properly after power-on.

•

Turn the printer off and on again.

•

Is showing on the LCD (about for one second).?

•

Is the AC cable connected properly?

Connect the AC cable correctly.

▼

•

Yes Is +5V output to the panel connector (OPTN connector) on the engine board (71K PWB)?

Pins 6, 7 and 14: +5V Pins 1, 3, 11 and 16: 0V

Yes Is +5V output to the panel connector on the relay board (71 PWB)?

Pin 5: +5V

Pin 2: 0V

Replace the relay board.

▼

Yes Is the operator panel cable connected properly?

Connect the cable properly.

▼

Yes Replace the operator panel cable. Is the printer recovered from the error?

Replace the operator panel cover Assy.

▼

Yes End

▼

•

Is +5V output to the power connector of the engine board (71K PWB)?
Pins 11, 12, 13 and 14: +5V

Pins 3, 4, 5, 6, 25, 26, 27 and 28: 0V

Replace the low voltage power unit after checking the power connector for connection.

▼

•

Yes Replace the engine board.

▼

•

Yes

Are the following voltages output to the PU IF connector of the main board?
Pins 137 to 147, 187 to 197: 5V

Pins 125 to 136, 175 to 186: +3.3V

Pins 148 and 198: +12V

Pins 101 to 124, 149 to 174, 199 and 200: 0V

Yes Replace the main board.

▼

•

Are the following voltages output to the power connector of the engine board?
Pins 11, 12, 13 and 14:5V

Pins 15, 15, 17 and 18: +3.3V Pin 1: +12V

Pins 7, 8, 9 and 10: +32V

Pins 3, 4, 5,6, 25, 26, 27 and 28: 0V

Yes Replace the engine board.

▼

•

Replace the low voltage power supply.

Summary of Contents for C7400















































































































































































Search results

Summary of Contents for C7400

Reviews:

Related manuals for C7400

Brands by name

Popular brands

Oki C7400, Maintenance Manual

Search results

Summary of Contents for C7400

Reviews:

Related manuals for C7400

Brands by name

Popular brands