43827101TH Rev.2
88 /
Oki Data CONFIDENTIAL
4.2.16 Feeder Unit / Front sensor PCB/ MPT Hopping Roller / Frame Assy Separator
/ Cover Front
(1)
Open the top cover.
(2)
Remove the plate shield, and unplug the connector. (See Subsection 4.2.6.)
(3)
Free the claws of Stay L
1
and Stay R
2
, and remove feeder unit
3
by sliding it to the right.
(4)
Detach the motor cover. (See Subsection 4.2.12.)
(5)
Disassemble cover sensor
4
by freeing the claw.
(6)
Unplug the connector, and disassemble Front sensor PCB
5
.
(7)
Remove MPT Assy. (See Subsection 4.2.15.)
(8)
Detach lever
6
by turning it until its claw is freed.
(9)
Remove two screws (black)
7
, and detach stay L
1
.
(10) Remove four screws (black)
8
, free two claws
B
on the front side, and disassemble feed
Assy
9
.
(11) Detach two lock shafts
0
and two springs
A
, and disassemble guide Assy
B
by freeing the
four claws.
(12) Remove hopping roller shaft
C
.
(13) Free the two fulcrums, and remove frame assembly separator
D
and spring
E
.
Figure 4-2-16 Feeder Unit / Front sensor PCB/ MPT Hopping Roller / Frame Assy Separator
/ Cover Front
0
0
B
4
A
A
1
7
7
6
5
E
D
2
C
3
9
8
8
Claws B
Claw