Oki Data CONFIDENTIAL
43827101TH Rev.2
164 /
6.5
Internal cleaning of printer
Cleaning the interior of the printer.
Depending on the print pattern, toner may adhere to the metal shaft located between the fuser unit
and the cyan image drum cartridge. Execute this cleaning if the metal shaft has an adherence of
toner.
(1) Turn OFF the power of the printer.
O
I
(2) Open the top cover by pressing the OPEN button.
The fuser unit is extremely hot. Do not touch it.
Personal injuries may occur.
OPEN button
(3) Take out the image drum cartridges
1. Take out the four image drum cartridges and place them on a flat-top table.
2. After taking out the image drum cartridges, cover them with a black sheet of paper.
Note!
•
The image drums (green tubular parts) are extremely vulnerable. Use good caution in
handling them.
•
Do not expose the image drum cartridges to direct sun or intense light (over
approximately 1500 luxes). Even under the inside lighting, do not leave them exposed
for five minutes or longer.