Oki C5550 MFP User Manual Download Page 19

Page: 19 / 244

C5550 MFP User’s Guide

Getting started > 19

ETTING

STARTED

Open the document cover.

Move scan lock lever to UNLOCKED position.

Scanner unlock.eps

NSTALLING

MFP

DRIVERS

AND

UTILITIES

WAIN

AND

PRINTER

DRIVERS

Start Microsoft Windows.

Insert the CD-ROM supplied into your CD ROM drive.

The CD-ROM will auto launch on most systems. However,
if your system does not support auto launching CD-ROMs,
press the Start button, choose RUN, type d:\setup.exe (d:
the CD-ROM drive in use), and then click

Follow the on-screen instructions to complete the driver
installation.

CAUTION!

Make sure the scanner is in the UNLOCKED position
before operating.

CAUTION!

To ensure the scan function works properly, install
the TWAIN driver FIRST then the printer driver,
before connecting to the computer.

Summary of Contents for C5550 MFP





















































































































































































































































Search results

Summary of Contents for C5550 MFP

Reviews:

Related manuals for C5550 MFP

Brands by name

Popular brands

Oki C5550 MFP, User Manual

Search results

Summary of Contents for C5550 MFP

Reviews:

Related manuals for C5550 MFP

Brands by name

Popular brands