BV1270SIP-OD OD Quick Start Guide
Oki Electric Industry Co.,Ltd.
Page 12 of 33
Connect Computer with RS-232C Cable
To initialize a newly installed BV1270SIP-OD unit using the Common Maintenance Console Software Unit
Information Setup Wizard, a computer or terminal must be connected directly to the unit using an RS-232C serial
cable (straight-through) with DB9 Female to DB9 Female connectors. The pin configuration for the serial cable is
shown in Figure 1-9.
Figure 1-9: RS-232C pin configuration
To connect the computer with the BV1270SIP-OD unit:
1.
Turn the computer power OFF.
2.
Connect the RS-232C cable to one of the computer’s com ports (e.g. Com 1) and to the Serial Port
connector on the BV1270SIP-OD front panel as shown in Figure1-10
DB9 Female
DB9 Female
