BMG7011 and BMG7012 User’s Guide Rev. 1.9
© Copyright, 2004 Oki Network Technologies. All Rights Reserved
6
2.
Double-click
Local Area Connection
.
3.
Click
Properties
.
4.
Click
Internet Protocol (TCP/IP)
and then click
Properties
.
5.
Check
Use the following IP address.
6.
Set
IP address
as 192.168.100.100,
Subnet mask
as 255.255.255.0 and press
OK
.
For Windows NT
1.
From the
Start
menu, click
Settings,
and then click
Control Panel
.
2.
Double-click
Network
.
3.
On the
Protocol
tab, check if TCP/IP protocol is installed on the components list.
4.
If yes, go to Step 7. If no, then click
Add
.
5.
Highlight
TCP/IP Protocol
and click
OK
.
6.
When asked to use DHCP, click
No
.
7.
Select
TCP/IP Protocol
and click
Properties
.
8.
When Information Message appears, click
OK
.
9.
On the
IP Address
tab, check
Specify an IP address.
10.
Set
IP address
as 192.168.100.100,
Subnet mask
as 255.255.255.0 and press
OK
.
11.
When asked to restart your computer, click
Yes
.
For Linux
1.
In command line interface, enter
netconf
.
2.
Highlight and click
Host name and IP network devices
.
3.
Set
IP address
as 192.168.100.100,
Subnet mask
as 255.255.255.0.
4.
Highlight and click
Accept
to save the configuration.
2.4
Configuring the BMG7011 and BMG7012 VoIP gateways
Oki has integrated a powerful Web based server within the BMG7011 and BMG7012 gateways for quick and easy
verification of connection status and device configuration.
2.4.1
Configuring via Web Browser
Once your PC is properly configured, please proceed the following steps:
1.
Start the web browser.
2.
Enter the default IP address
192.168.100.1
of this device in the Address box to access the web configuration
menu.
