BMG7011 and BMG7012 User’s Guide Rev. 1.9
© Copyright, 2004 Oki Network Technologies. All Rights Reserved
20
3.2
DHCP Server Configuration
3.2.1 DHCP
Configuration
If the device mode is gateway mode, we support DHCP Server on LAN side to assign IP address, etc. to the PC(s)
connected to the LAN port. You can set the Status, Last IP and Mode etc. on this page. After you make the settings,
click
OK
for the settings to immediately take effect.
Figure 9 – DHCP Configuration Window
Item Description
Status
The DHCP Server is enabled or disabled.
Last IP
The last IP can be assigned by the DHCP server.
Mode
The network settings assigned to the DHCP Client is Auto mode or Manual Mode. In Auto mode, the DNS
settings are from the WAN side. In Manual mode, the DNS settings are from the user’s input in this page.
DNS
You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode.
Domain
You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode.
Least time
The least time of the DHCP client to holding the network settings. The value is useful in Auto mode.
