Oki B930dn User Manual Download

Page: 126 / 211

B930n User’s Guide> 130

The printer is not

connected.

Cause 1

On the Macintosh, the printer is not

selected correctly in the Chooser. Or, the

printer is processing another job.

Verification 1

Check that the printer is selected

correctly on the Macintosh. If the printer

is processing another job, the job must

be completed before the printer can be

connected.

Action 1

If the printer is still not connected

though it is selected correctly and is not

processing another job, check the

following causes.

Cause 2

The EtherTalk port of the printer is set

to [Disable]. Or, the Start/Stop setting

for EtherTalk has been set to Off by the

PostScript command. Or, the printer is

in the offline status

Verification 2

Check that the port used is set to

[Enable] and that the Start/ Stop

setting is set to [Start]. Check whether

Off-line is displayed on the printer

Operator Panel.

Action 2

If the printer still cannot be connected

although all the above conditions are

normal, contact service.

CAUSE

TREATMENT

Summary of Contents for B930dn




















































































































































































































Search results

Summary of Contents for B930dn

Reviews:

Related manuals for B930dn

Brands by name

Popular brands

Oki B930dn, User Manual

Search results

Summary of Contents for B930dn

Reviews:

Related manuals for B930dn

Brands by name

Popular brands