ENGLISH
ENGLISH
Chapter 7
Child
ʼ
s bicycle seat OKBABY SIRIUS
Page 71
Chapter 7
Child
ʼ
s bicycle seat OKBABY SIRIUS
Page 70
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
Figure 3:
Fastening and unfastening the child
ʼ
s
feet.
Always make sure your child
ʼ
s feet are
well fastened to the footrests. The safe-
ty belt is long for easy adjustment. To
release the belt 22, lift it out to free it
from the bridge trapping it.
WARNING!
Never pull the belt on
your child
ʼ
s foot too tight, this could hurt
him or cause him to get cramp during the
ride.
DANGER!
After having fixed the
footrests for your child, it is very impor-
tant to check that the child cannot release
its feet on its own: lift up your child
ʼ
s leg
to check it is well secured.
DANGER!
It may occur that your
child is able to pull his foot out of
his shoe, which remains attached to the
footrest by the strap 22; to prevent this
from happening, always check that your
child
ʼ
s shoes are correctly fastened.
DANGER!
Once you have placed the
child in the seat, check to see that the
seat is slightly inclined backwards to pre-
vent the child from slipping forwards and
sliding out of the seat. Check therefore
that the child seat backrest is adjusted so
that it inclines backwards slightly.
22
3
Figure 4a:
Fasten the safety belt onto the child.
Adjust the height and length of the belts
according to the size of the child.
Setting the height of the belt:
It is possible to extract the belt to adjust
the height by pressing the block behind
the backrest towards the opening at inter-
vals. Select the top and bottom openings
to fasten the belts according to the height
of the child.
Setting the length of the belt:
Adjust the length of the belts by moving
the clasps on the belt. The belts must be
fastened firmly without them being too
tight for the child.
Fastening the safety belt system:
Fastening the belt clasp. Check that the
belt clasp clicks shut properly, and then
pull the belt.
DANGER!
The fastening of the belt is
an important safety precaution and must
always be in place Always check that it is
correctly fastened before every trip! The
life of a child who is not attached is in
danger!
Figure 4b:
Unfastening the belts.
Press simultaneously the two side and
central press-buttons on the clasp. The
clasp will open
IMPORTANT/NOTE:
Releasing the clasp
is not that easy to guarantee maximum
levels of safety
Figure 5:
Removing the child seat.
Press the release button (1) on the faste-
ning block (8) and remove the child seat.
4a
4b
5
