4
Product Description
The seat is suitable for bicycles with wheels of 26
ʼʼ
/28
ʼʼ
and frames with a
round cross-section of 28-40 mm. It can not be installed on different sized
frames or those with oval or square bars.
It can not be installed if the luggage rack on the bicycle is over 15 cm in
width. In this case remove the luggage rack and replace it with a narrower
model before installing the child seat. The child seat is fitted with an A.B.S.
inclination adjuster system. We have designed and patented this system
(Automatic Baricentre System) which automatically keeps the barycentre of
the weight in the correct position on the bicycle wheel axis to guarantee
safety when carrying your child. We have combined comfort with riding
manageability.
Please contact the manufacturer if you are not certain that the child seat is
suitable for your bicycle.
5
Signs and symbols
Chapter 6 describes the assembly procedure and chapter 7 describes how to
use the child seat.
Carefully read the chapters in order to understand and use all the options
and functions.
The following terms and signs are used:
Symbol Meaning
DANGER
Warning against possible serious or fatal
injuries to persons.
NOTICE
Warning against possible slight injuries to
persons or damage to things.
WARNING
Warning against any faults and/or destroying
the
product
IMPORTANT/NOTE
Important or useful advice is provided
ENGLISH
ENGLISH
Chapter 6
Child
ʼ
s bicycle seat OKBABY SIRIUS
Page 65
Chapter 4/5
Child
ʼ
s bicycle seat OKBABY SIRIUS
Page 64
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
DANGER!
Never tamper with the
product!
Repairs of all parts important for the safe-
ty of the seat must be carried out by spe-
cialized personnel only.
WARNING!
Read the safety warnings
(see chap.1) to avoid injuries or damage
caused by incorrect installation! Never use
the child seat if it is damaged
IMPORTANT/NOTE:
The numbers in brak-
kets refer to Chap.3 “Product Overview".
IMPORTANT/NOTE:
When fixing the seat
to the bicycle, take care not to damage
or trap any brake cables or cables of the
electric circuit of the bicycle.
Figure 1:
Fasten the backrest to the metal sup-
port.
Phase 1 : Open the fastening cover (14)
Phase 2 : Raise the backrest until it rests
on the metal support (15).
Phase 3 : Close the fastening cover (14)
and push it upwards to hook on the safety
lever (24).
DANGER!
Check that the fastening
cover is blocked by its safety lever. If the
cover opens, the child can slide forwards
and unbalance the person riding the
bicycle.
Figure 2:
Incline the backrest as far as possible by
pressing the knob downwards whilst rota-
ting it (16).
6
Mounting and assembling the child seat
16
14
24
15
24
1
2
Warning terms
