GB
| Operating Instruction
Technical Specifications
Battery voltage/operation voltage V DC 7,2
Battery type Ah / Wh 2,2 / 15,8 / lithium-ion
Operating time min.
max. 130
No-load Speed n
0
rpm 1000
Cutting width mm 75
Weight kg 0,600
Acoustic capacity level
dB(A) 86
Noise pressure level as per
(DIN EN 60745-2-15)
dB (A) 58,4
K 3,0 dB (A)
Vibrations
(DIN EN 60745-2-15)
m/s
2
<2,5
K 1,5 m/s
2
Mains battery charger
Mains voltage V~ / Hz 100-240 / 50-60
Charging voltage V DC 9,6
Charging current mA 700
Charging time h
approx 3 - 5 hours
Technical changes are reserved.
-
The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
-
The specified vibration emission value can also be necessary for the assessment of work breaks are used.
-
The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
-
Note: You create the privilege against vascular pulsations of the hands in time breaks.
-
Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
-
Always keep hands and feet away from the cutting tools, particularly when switching on the motor!
Accu Grass shear
GS 8018
LI
GB-2
