GB
| Operating Instruction
switched off before inserting the bat-
tery.
Inserting a battery into a switched-
on power tool may lead to accidents!
b) Only use charging devices recom-
mended by the manufacturer to charge
the batteries.
Charging units are usually
designed for certain types of batteries;
if used with other types there is a risk
of fire!
c) Only use batteries designed for your
power tool.
The use of other batteries
may lead to injury and risk of fire!
d) Keep unused batteries clear of paper
clips, coins, keys, nails, screws or
other small metal objects that may
bridge the contacts.
A short circuit be-
tween the battery contacts may lead to
burns or fire!
e)
Improper use may result in fluid leak
-
ing out of the battery. Avoid any con-
tact with battery fluid. Flush with water
in case of contact. If battery fluid
should get into your eyes seek medi-
cal advice additionally.
Leaking battery
fluid may lead to irritations of the skin or
burns!
6) Service
a) Have the power tool serviced by quali-
fied technical personnel only; repairs
should be carried out using exclusive-
ly original spare parts.
This will ensure
the safe operation of the power tool.
Safety instructions for grass shear
-
Keep all parts of your body away from
the cutting blades. Do not try to remove
cut-off matter with the tool running. Do
not try to hold material to be cut off with
your hand. Remove cut-off matter that is
stuck between the blades only with the
tool being switched off!
When working
with hedge trimmers even a short moment
of inattentiveness may result in severe injury.
-
Carry the hedge trimmer at the handle
with the cutting blades standing still.
Always put on the protection cover when
transporting or storing the hedge trimmer.
Careful handling reduces the risk of injury
through the cutting blades.
-
Only hold the power tool on the insulated
handle surfaces, because the cutting blade
can come into contact with concealed
power lines.
If the cutting blade comes into
contact with an energised line, device parts
can become energised and cause an electric
shock.
-
Before starting work, search the hedge
for concealed objects, e.g. wire, etc.
Pay
careful attention to ensure that the cutting tool
does not come into contact with wire or other
metal objects.
-
Hold the power tool properly, e.g. with
both hands on the handles, if two handles
are present.
Losing control of the device can
result in injuries.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be supervised
to ensure that they do not play with the
appliance.
• This machine may cause serious injuries.
Please read the instruction manual
carefully as to the correct handling, the
preparations, the maintenance and the
proper use of the hedgetrimmer. Familiarize
yourself with the machine before the first
use and also have yourself introduced to
practical use of the machine.
• The cutting tool continues to run after the
device is switched off.
• Turn off power before cleaning.
•
Beware! Keep your fingers away from the
cutting area!
• Only switch on the device if your hands
and feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such
debris while working!
• Turn the machine off before transporting
and wait until the blade stops moving.
Maintenance and cleaning should be
performed only when the machine is
turned off.
• Children and teenagers under 16 years of
GB-5
