background image

OKA Qualitätspass   

 

bitte sorgfältig aufbewahren

OKA Quality Passport

     please store safely

OKA kwaliteitspas

     zorgvuldig bewaren alstublieft

OKA ... ein Familienunternehmen mit 150 Jahren ... Qualität aus Tradition ...
OKA ... a family business for 150 years ... Quality is our tradition ...
OKA ... een familieonderneming met 150 jaar ... kwaliteit uit traditie ...

Dieses Produkt wurde hergestellt am:
This product was manufactured on:
Dit product werd vervaardigd op:

Die Qualität und Vollständigkeit wurde geprüft durch:
Quality and integrity checked by:
De kwaliteit en de volledigheid werd gecontroleerd door:

Sollten dennoch Gründe für eine Reklamation gegeben sein, verwenden Sie bitte den Vordruck.
Should there however still be reasons for complaint please use the form on this side.
Zouden desondanks reden voor een reclamatie voorhanden zijn, gebruikt U alstublieft het voorgedrukt formulier.

Service contacts

Servicekontakte

Servicecontacten

Complaint report 

Beanstandungsmeldung

Reclamatiemelding 

OKA Büromöbel GmbH & Co. KG
Eibauer Str. 1 - 5
D-02727 Ebersbach-Neugersdorf
fon: +49 (0) 3586 - 711 - 0
fax: +49 (0) 3586 - 711-170
E-Mail: [email protected]
www.oka.de

Vorgangsnummer:
Case number:
Procedurenummer:

Position (oder Produktbeschreibung)
Position (or product description)
Positie (of productbeschrijving)

Grund der Beanstandung:
Reason for complaint:
Reden van de reclamatie:

Der Mangel wurde festgestellt:
The following fault was found:
Het gebrek werd vastgesteld:

nach der Entladung
after unloading
na het lossen

nach dem Vertragen
after carrying
na het verdragen

nach der Montage
after assembly
na de montage

während des Gebrauchs
during use
gedurende het gebruik

Datum:
Date:
Jaartal:

Summary of Contents for Flexline CompactContainer













Reviews: