![background image](http://html1.mh-extra.com/html/ojec-co/h-430rx/h-430rx_user-manual_727463008.webp)
Page
8
of
15
3. Setting Flash Groups
When the H-430TX is in HOLD mode and the H-430RX is in CAMERA mode, the group function
does not work.
With the H-430TX in CAMERA mode, there are seven different combinations of groups that can
be set.
Press the group button (9) and the Group LEDs show the current group setting. Pressing the
group button again, the group will be changed, cycling in this order:
G1→G2→G3→G1+G2→G1+G3→G2+G3→ G1+G2+G3→G1 ...
With the H-430RX in FLASH mode, it can only be a member of a single group. Press the group
button (9) and it selects and changes the group as the H-430TX does, but cycling in this order:
G1→G2→G3→G1 …
The flash groups LEDs will turn
off after approximately 4 seconds
after the last press of the group
select button.
Note:
For the flash to fire, the
group set on the RX must be one
of the groups set on the TX.