![background image](http://html1.mh-extra.com/html/ojec-co/h-430rx/h-430rx_user-manual_727463007.webp)
Page 7 of 15
Setting Channel, Function Mode and Flash Groups
1.
Setting Channels
The H-430 can be set to one of 5 possible channels (“1”,“2”,“3”,“4”,“1234”). Ensure that you
set all the transceivers to the same channel before use. One H-430TX can work with multiple
H-430RXs to simultaneously control multiple flashes and/or multiple remote cameras. The
H-430 can also be used by many photographers working together to control different cameras,
but each photographer must set their own channel different to the others to avoid signal
interference.
Set different channels by pressing the
channel setting button (7) on the side of
the H-430:
2.
Setting Function
Camera-
: Use this when the H-430TX is connected to the camera, and when the H-430RX is
connected to the camera for ‘wireless shutter release’ function.
FLASH-
: Use this when the H-430RX is connected to the flash and when the H-430RX is
connected to the camera for ‘Master camera to control multiple cameras’ function.
HOLD-
: Turns the H-430 TX into a wireless remote camera trigger.