Page
4
of
15
H-430RX
1.
LED Status indicator light
2.
4 bit channel signal LED
3.
3 bit group signal LED
4.
Test button
5.
Hot shoe (flash only)
6.
Channel setting button
7.
2.5mm shutter trigger
socket
8.
2.5mm flash trigger
socket
9.
Group setting button
10.
Power/flash/camera
mode function switch
11.
Cold shoe mount
12.
Battery bay cover
13.
Cold shoe locking wheel
14.
Cold shoe locking pin
15.
Hole for lanyard strap
16.
¼” BSW thread metal
fixed insert
Preparation for use
1.
Install the batteries as shown in the picture (applies to both
H-430TX and H-430RX).
2.
Turn on power and select function mode.
3.
Set all units to the same channel
4.
Set up the groups
5.
Connect to devices.
For details of steps 2-4, see the section below
: “Setting Channel,
Function Mode and Flash Groups”
.