© 2015 OJ Electronics A/S
41
advanced settings and read-outs
W
at
erline
r
oom Contr
oller -
type W
lC
t
3
Press the UP (
△
) and DOWN (
▽
) buttons simultaneously for 3 seconds. INFO will be displayed.
inFo - information
INFO allows you to view the room and floor temperatures actually measured.
The floor temperature is only shown if a floor sensor is installed.
Software Version
Room temperature
Outdoor temperature
If no sensor is installed,
“OFF” is displayed
Press the UP (
△
) or DOWN (
▽
) button to view the various read-outs.
No changes can be made here. Use the OK (√) button to exit.
app – application
Select if the room controller is to be used in one of the special modes.
On entering this menu, the current setting will be displayed.
radiator mode
Operates the channel as a radiator zone. Operates as an ON/OFF
regulator, activates the X-OUTPUT and boiler (but not the UFH pump).
Channels selected in the ArEA menu will also act as radiator channels.
3 sec.
Summary of Contents for WLCT3
Page 55: ...2015 OJ Electronics A S 55...
