Cut off power supply to the burner and close the manual shut-off valves
always before any maintenance work. Cutting power is adequate when
just inspecting the device.
Secure all safety covers, enclosures, and guards with all screws before
start-up. Use appropriate tools.
Wear proper hearing protection and personal protective equipment,
such as protective footwear, gloves, and safety goggles when
necessary.
If burner start-up fails consecutively three times, do not restart burner
before carefully investigating the reason for the failure.
Do not touch hot pipes or surfaces during operation or maintenance.
Permissible gas inlet temperature range is +5...+122 °F. Pay special
attention to gas temperature when using LNG.
Fuel changeover shall always be done by an expert.
Pilot line is designed to be used at maximum 5% rating of full power.
Do not use PTFE tape in piping.
Emergency shutdown
In an emergency, cut off power supply to the burner. Close the manual shut-off
valves. After safety check you can restart the burner. Check settings, and monitor that
operation continues as normal.
M4248 2316EN
5 (114)
