01/04/2021
Page 7
7.3.
VALVE CLEARANCE
T
he valve clearance for all engines must be:
INTAKE
EXHAUST
0,08 (±0.02) mm
0,10 (± 0,02) mm
0,00315 (± 0.0008) in
0,004 (± 0,0008) in
Info
Check the valve clearance when the engine is cold.
8. BATTERY
(VERSIONE 110 A)
Characteristics:
Lithium battery 12V – 24Wh – 140A.
Battery with acid 12V – 6Ah – 130A.
8.1.
WARNINGS
•
Do not short circuit the battery to avoid dangerous situations that can cause serious injury.
•
Charge the battery at least every six months
, the voltage must never drop below 10 V.
•
Do not charge the battery for more than 24 hours.
•
Do not charge the battery using a voltage higher than 15V.
•
Do not over charge or over discharge the battery.
•
Do not reverse the polarity of the battery.
•
Do not disassemble, deform or modify the battery.
•
Keep out of reach of children.
9. BRAKES
9.1.
BRAKE FLUID LEVEL CHECK
Use only brake fluid
DOT 4
.
Before each use, check the brake fluid level through the appropriate porthole located on the front and rear
brake pump (see pictures).
It is recommended to avoid hard braking (which can reduce the stability of the vehicle), as
well as to reduce the speed near curves in order to avoid the risk of falls and slips.
NOTA: Carefully read the battery instruction manual supplied with the motorcycle for
information regarding installation, charging process and maintenance.
