62
PAS 2200
EN
USE
> > At first use
•
Carefully unpack the appliance and remove all the packaging materials and the pro-
motional labels.
•
Clean the device and accessories (see “Cleaning and maintenance” paragraph).
Never immerse the motor unit in water or in other liquids.
> > Assembly
Place the appliance on a plane, horizontal, clean, dry and stable surface.
Make sure that the suction feet (11) are firmly fixed to the bearing plane.
Always assemble the device in full before you connect it to the
mains power.
1. Place the mixing container on the motor unit
(Fig. B)
.
2. Push the dough screw conveyor into the connecting piece
(Fig. C)
.
3. Push the kneading spiral onto the drive shaft of the dough screw conveyor. The
kneading spiral can only be pushed onto the drive shaft if the feather key in the
opening of the kneading spiral extends into the groove on the drive shaft
(Fig. D)
.
4. Now push the drive shaft of the dough screw conveyor with the kneading spiral
through the round dough outlet opening in the mixing container.
5. Insert the drive shaft into the pentagonal opening of the motor unit
(Fig. E)
.
6. Push the connecting piece up to the limit stop into the round dough outlet opening
of the mixing container. On the connecting piece there is a circular mark (shown
in black on the picture). Make sure when inserting the connecting piece that the
circular mark on the connecting piece is opposite the circular mark on the mixing
container.
7. Turn the connecting piece clockwise (in the direction of the arrow marked on the
mixing container) so that the circular mark on the connecting piece is opposite the
lower circular mark on the mixing container. The bayonet closure is now locked shut
(Fig. F)
.
8. Place a pasta attachment of your choice onto the dough outlet opening on the con-
necting piece
(Fig. G)
.
