88
IRS 1980
EN
TROUBLESHOOTING
Problem
Cause
Solution
The boiler unit does not heat
up the water.
Relative light off.
The appliance is not switched
on.
Check that the plug is correctly
connected to the power outlet.
Make sure that you have
pressed the ON button
.
Water drops come out from the
plate (9).
It is the first time that the
appliance has been used or it
has not been used for a long
time; there is some residual
water in the steam hose.
Press the steam button (12)
until generating continuous
steam flow.
The thermostat (11) has been
set on a too low temperature
for steam ironing.
S e l e c t a n a p p r o p r i a t e
temperature for steam ironing.
Decreasing steam
Pressure of the steam inside
the boiler has decreased.
Wait 1 ÷ 2 minutes for the water
to heat up and the “
steam
ready
“, light comes on, then try
using the steam again.
There is enough water, but no
steam.
The water reservoir is not
correctly positioned.
Make sure that the water
reservoir is correctly positioned.
The “
low water level”
indicator light (g) flashes.
Lack of water in the reservoir.
Disconnect the plug from the
socket.
Remove the reservoir (see
p a ra gra p h "
refilling the
reservoir
") and add water.
Reposition the reser voir
correctly.
Water or steam leaks from the
connector on the back of the
ironing system (1).
The connector has not been
correctly connected.
Co n n e c t t h e co n n e c to r
correctly.
Broken or faulty seals.
Contact assistance for the
necessary checks.
Steam leaks.
The appliance does not work. Contact assistance for the
necessary checks.
