OHM bicycle User Manual Download Page 45

Page: 45 / 49

ohmcycles.com

LONG-TERM STORAGE OF BATTERY

Lithium Ion (Li-ion) Battery

✔

It is recommended that Li-ion battery packs be fully charged

before a long storage period.

✔

Store in a dry area with low humidity.

✔

Store in 5ºC to 25ºC (40 ºF to 80 ºF) area. (preferably 20ºC (68 ºF))

✔

Keep away from extreme temperature changes.

✔

Avoid direct exposure to sun rays and heat when storing a battery

pack in a warehouse.

✔

Prevent a battery pack from having dew condensation

(to prevent rust).

✔

Never leave a battery uncharged for a long period of time

(2 months or more).

✔

When time comes to replace battery, please return used

(depleted) battery to your OHM Dealer.

NOTE:

Under shipping regulations, Lithium-ion batteries (as most

large battery packs) are considered hazardous materials. When
the battery container is installed on the bike, ground/sea transport
is allowed; by air, hazardous material regulations apply. (Please
conﬁrm with local shipping regulations.)

Summary of Contents for bicycle


















































Search results

Summary of Contents for bicycle

Reviews:

Related manuals for bicycle

Brands by name

Popular brands

OHM bicycle, User Manual

Search results

Summary of Contents for bicycle

Reviews:

Related manuals for bicycle

Brands by name

Popular brands