F
O
U
R
>
T
E
C
H
N
IC
A
L
IN
F
O
R
M
A
T
IO
N
32
4.6
BICYCLE SUSPENSION
Your OHM bicycle is equipped with a suspension system. Be sure to
read and follow the suspension manufacturer’s set up and service
instructions.
WARNING:
Failure to maintain, check and properly
adjust the suspension system may result in suspension
malfunction, which may cause you to lose control and fall.
WARNING:
Changing suspension adjustment can
change the handling and braking characteristics of your
bicycle.
Never change suspension adjustment unless you are
thoroughly familiar with the suspension system manufacturer’s
instructions, and always check for changes in the handling and
braking of the bicycle after a suspension adjustment.
SET UP NOTES FOR SEAT POST SUSPENSION
Your OHM bicycle uses a seat post suspension that can be tuned to
your particular weight, riding style and terrain on which you ride - by
adjusting the preload. The preload can be adjusted for riders from
144 to 220.5 lb. (65 to 100kg).
Before you make any adjustments, take a ride and feel the function
of the seat post. If you feel too much “SAG” (the saddle moves down
and back when you mount the saddle), you have to increase the
preload of the seat post, in order to compensate the “SAG”. A certain
amount of “SAG” - between 0 - 10mm ( .4 inches) is allowed, but
it depends on your weight and the terrain on which you are riding.
Changing the preload alters the “SAG” and the firmness of the initial
seat post movement. In order to increase the preload, you have to turn
clockwise the adjuster plug at the bottom of seat post, using a 6mm
Allen key. Do not turn the adjuster plug counterclockwise beyond the
initial position at delivery, as this could result in failure of the preload
adjuster plug and can strip the threads. In this basic position, around
10mm (.4 inches) of the seat post thread should be visible.
SET UP NOTES FOR FRONT SUSPENSION
Your OHM bicycle is equipped with a front suspension system.
Be sure to read and follow the suspension manufacturer’s set up
and service instructions. If you do not have the manufacturer’s
instructions, see your local OHM dealer.
WARNING:
Failure to maintain, check and properly
adjust the suspension system may result in suspension
malfunction, which may cause you to lose control and fall.
With front suspension, increased speed may also increase your risk of
injury. When braking, the front of your bicycle will dip and may cause you
to lose control and fall. Learn to handle your suspension system safely.
WARNING:
Changing suspension adjustment can
change the handling and braking characteristics of your
bicycle.
Summary of Contents for bicycle
Page 49: ...ohmcycles com...
