OHM ELECTRIC COOL CABI OCA-S2300AC, Instruction Manual, Page: 39 / 44

17
Detach the filter from the guide of the
front panel to clean or replace.
◎
Replacement filter for external suction port
Model Applicable COOLCABI models
CF-S5 (2 pcs./set) OCA-S2300AC
CF-S6 (2 pcs./set) OCA-S3000AC
6-2 Replacement of the external fan
Fan replacement procedures are as follows.
1. Remove the screw caps for eyebolt on the top panel.
2. Detach the front cover by removing 8 screws.
3. Remove 2 screws from the external fan.
4. Remove the power cord, terminal insulation rubber and
the ground wire to detach the fan.
5. Fit the terminal insulation rubber on the terminals so they
get through the two slits provided in the rubber. Attach the
ground wire, the power cord and then the cooling unit.
Pay attention not to pinch the cables.
6. Put the front panel and the screw caps for eyebolt.
Please see the Page 18 for the model of replacement fan
6-3 Replacement of the internal fan
1. Remove the screw caps for eyebolt on the top panel.
2. Detach the front cover by removing 8 screws.
3. Detach the top cover by removing 3 screws.
4. Detach the airflow guide by removing 2 screws.
5. Remove the fan fixing screw.
6. Disconnect the power cord to detach the fan.
7. Insert the power cord to a replacement fan and
then attach it to the cooling unit.
Pay attention not to pinch the cables.
8. Attach the airflow guide, top cover,
front cover and then the screw caps for eyebolt.
Please see the Page 18 for the model of replacement fan
Filter (white color)
External fan
Screw (8 places)
Screw cap
for eyebolt
Front panel
Internal fan
Top cover
Airflow guide