OHM ELECTRIC COOL CABI OCA-S2300AC, Instruction Manual, Page: 26 / 44

4
2-2 Mounting procedure
(1)Process the mounting surface to cut out the openings in accordance with the respective
mounting cutout drawings in Page 5.
(2)Place the enclosed sealing plate on the bottom surface of the cooling unit.
(3)Align the unit with the mounting cutout.
(4)Insert the enclosed bolt into the mounting hole from outside of the unit.
(5)Set the washer, spring and then nut in the bolt and tighten the nut to securely fix the unit.
(6)To ensure keep the panel interior airtight, caulk the gaps completely, if any.
(7)Apply the enclosed “ Alarm explanation sheet ” to an appropriate place where readily visible.
Mounting works
Caution
OCA-S2300AC and OCA-S3000AC
has two nuts on top for installation
of eyebolts. Please lift up evenly
using eyebolts whenever lifting up
a cooling unit.
Lifting up one side only may
result in breakdown or damage of
the product.
Alarm explanation
sheet
Fixing bolt
COOLCABI
Packing
Mounting surface
with cutouts
Washer
Spring washer
Nut
Nut for eyebolt
installation