OHM ELECTRIC COOL CABI OCA-S2300AC, Instruction Manual, Page: 28 / 44

6
2-3 Attachment of drain hose
Moisture arisen from dehumidification by COOLCABI is discharged through a drain hose.
Pay attention to the following notices in order to attach the drain hose properly.
Caution
If the drain hose is not attached properly, water collected in the drain catch inside the
COOLCABI may overflow into the control panel interior.
- In case the joint of a drain hose and a drain pipe is not tight enough, use a hose
band to fix the joint securely.
- To prevent a hose from coming off, insert it deep enough to a drain pipe.
Do not connect two drain pipes. Apply the enclosed L joint on the corner of the enclosure.
- Let a drain hose go directly downward without kinks and windings.
- Any part of a drain hose should not be higher than the level of a drain pipe of COOLCABI.
- The free end of a drain hose should be directly downward without bending.
- A drain hose should be directed downward within 50cm distance from a drain pipe end.
- In case a hose has to be routed crosswise over 50cm depending on the application,
please give a slope as much as possible so as to ensure smooth drainage.
- Adjust the hose length so it end does not submerge in the container.
- Empty the container frequently especially on
humid days.
Enclosure
COOL
CABI
L joint
Attention: Do not put excessive force on drain pipe when working.
50cm or less
COOLCABI
COOLCABI
Enclosure Enclosure