3
MOUNTING INSTRUCTIONS
9
8
10
8
Carefully lift the rear end of the tank, note
the grounding wire on the left side and make
sure not to squeeze or stretch any cables.
Disconnect the grounding wire and the electric
cable to get access to the screws for the left
side cover.
9
Remove the left side cover, see figure.
10
Separate the left side cover into 2 parts. Install
the rear part.
11
Connect the grounding wire and the electric
cable, install the cover, bracket and the seat.
Caution!
✋
Make sure that you tighten all screws to the
correct torque and that nothing fouls or restricts
movement of the shock absorber/front fork/
steering damper when the suspension is fully
compressed or extended.
