2
1
Put the motorcycle on a work stand so that the
rear wheel barely touches the ground.
2
Remove the original shock absorber.
MOUNTING INSTRUCTIONS
Warning!
⚠
We strongly recommend to let an Öhlins dealer
install this product.
Warning!
⚠
If you work with a lifted vehicle, make sure that it
is safely supported to prevent it from tipping over.
Note!
1
When you work with this product, see the
vehicle service manual for vehicle specific
procedures and important data.
Note!
1
Before you install this product clean the
vehicle.
3
Install the Öhlins shock absorber in the same
position as the original shock absorber.
Note!
1
Lower the vehicle so that the suspension
is slightly compressed before you tighten
the screws.
4
Remove the plastic spring cover from the
original shock absorber and install it on the
Öhlins shock absorber.
5
Remove the seat.
6
Remove the bracket at the rear end of the tank.
7
Remove the cover around the ignition lock.
7
6
4