OHAUS RC41M15-M, Instruction Manual

Page: 22 / 36

EN 20 Ranger
™
4000 Count Series
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
Parity [
paritY
]
Set the data bits and parity.
7 EVEN = 7 data bits, even parity
7 ODD = 7 data bits, odd parity
7 NONE = 7 data bits, no parity
8 NONE = 8 data bits, no parity
Stop bit [ stOP ]
Set the number of stop bits.
1 = 1 stop bits
2 = 2 stop bits
Handshake [ H.shake ]
Set the flow control method. Hardware handshaking is only available for COM1 menu.
NONE = no handshaking
ON-OFF = XON/XOFF software handshaking
Alternate command [
Alt.CmM
]
Define command character for the Print, Tare and Zero commands
Print
Set the alternate command character for Print
A to Z.
Tare
Set the alternate command character for Tare
A to Z.
Zero
Set the alternate command character for Zero.
A to Z.
End COM1, End COM2 [ End ]
Advance to the next menu or return to the top of the current menu.
4.8 Lock Menu
The Lock Menu is a software controlled option which can lock Menu settings to prevent
tampering.
Reset [ reset ]
Reset no , yes
Lock Cal off , on
Lock Setup off , on
Lock Read off , on
Lock Unit off , on
Lock Print off , on
Lock COM off , on
End Menu Lock Exit menu