Navigator
TM
IT-6
4. IMPOSTAZIONI
Il Menu Utente consente la personalizzazione delle impostazioni della bilancia.
Nota: Ulteriori sottomenu possono essere disponibili se sono installate le Opzioni di Interfaccia.
Vedere il Manuale Utente dell’Interfaccia per ulteriori informazioni sulle impostazioni.
4.1 Menu Navigazione
Menu Utente:
Sotto-menu:
.C.a.l.
.S.e.t.u.p.*
.M.o.d.e.
.U.n.i.t.*
.E.n.d.
Menu Items:
Span
Lin
End
b.light
A-OFF
IR**
Filter
AZT
Stab
Stab.C
End
Count
Percnt
Check
End
g
kg
…
End
* Nota: Le impostazioni disponibili variano in base a modelli e regioni
** La disponibilità del sensore IR dipende dal modello e dalla regione.
Premere e tenere premuto Menu fino a che si visualizzi (Menu) [
mMeNU
]. Quando rilasciato, si
visualizzerà il primo sotto-menu (Cal) [
.C.a.l.
].
Premere Yes per inserire il sotto-menu visualizzato o premere No per avanzare al successivo.
Selezionando un sotto-menu, si visualizzerà la prima voce del menu. Premere Yes per visualizzare le
impostazioni della voce del menu o premere No per spostarsi alla voce del menu successiva. Quando
si visualizzano le impostazioni, premere Si per accettare le impostazioni, o premere No per modificare
le impostazioni. Quando viene visualizzato [
Fine
], premere Yes per tornare alle selezioni del sotto-
menu o No per tornare alla prima voce del menu corrente.
4.2 Sotto-menu Cal
Intervallo [
SpaN
] (si, no) - Inizia una procedura di calibrazione dell’intervallo (zero e intervallo).
Una calibrazione dell’intervallo è importante quando si determinano le impostazioni iniziali della
bilancia.
Lin [
Lin
] (si, no) - Inizia una calibrazione di linearità (zero, punto medio e intervallo).
4.3 Sotto-menu di impostazione
La retroilluminazione [
b.light
] (on,off,Auto)-Quando la retroilluminazione è impostata su "on"
la bilancia sarà sempre "on". Quando la retroilluminazione è impostata su "Auto", la bilancia si
accenderà quando si preme un pulsante o il peso del display cambia.
Auto Off [
A-Off
] (on, off) - Quando Auto Off è impostato su "on" la bilancia si spegnerà auto-
maticamente dopo 5 minuti di inattività . L'autospegnimento (Auto off) viene utilizzato per
risparmiare la carica della batteria.
Sensore IR [
Ir.Func
] (Off, Tara, Funzione, Stampa, Zero, Display) - Queste impostazioni de-
terminano il ruolo del sensore IR. “Zero”, “Stampa”, “Funzione”
o “Tara” permettono al sensore