OHAUS Explorer EX1241, Instruction Manual

Page: 126 / 152

EN-124 EXPLORER BALANCES
The CAL TEST printout is automatically printed when a Calibration Test is performed.
Content
HEADER 1
HEADER 2
HEADER 3
HEADER 4
HEADER 5
TIME
RESULT
RESULT
RESULT
RESULT
RESULT
Calibration Test
Company Name
Address 1
Address 2
Address 3
Address 4
12/6/2010 4:33 AM
---Calibration test---
New Calibration: 3999.97 g
Old Calibration: 4000.00 g
Difference: 0.03 g
Weight ID__________
--------------End--------------
7.3 Output Format
The Result Data, and G/N/T data, is output in the following format.
Field: Label
1
Space
2
Weight
3
Space
2
Unit
4
Space Stability
5
Space G/N
6
Space
Term.
Characters
7
Length:
1 11 1 1

1

1

3
0

8
1. In certain cases, a Label field of up to 11 characters is included.
2. Each field is followed by a single delimiting space (ASCII 32).
3.
The Weight field is 9 right justified characters. If the value is negative, the “–“ character is located at the
immediate left of the most significant digit.
4. The Unit field contains the unit of measure abbreviation up to 5 characters.
5.
The Stability field contains the “?” character if the weight reading is not stable. The Stability field and the
following Space field are omitted if the weight reading is stable.
6. The G/N fi
eld contains the net or gross indication. For net weights, the field contains “NET”. For gross
weights, the field contains nothing, “G” or “B”, depending on the GROSS INDICATOR menu setting.
7. The Termination Characters field contains CRLF, Four CRLF or Form Feed (ASCII 12), depending on
the LINE FEED menu setting.