OHAUS Defender I-D33P15B1R1, Instruction Manual

Page: 8 / 84

EN-6 Defender 3000 Indicators
1.5. Control Functions
Figure 1-5 i-DT33P Control Panel Figure 1-6 i-DT33XW Control Panel
Button
Primary Function
(Short Press) On/Zero
If the terminal is
off, press to power
on;
If the terminal is
on, press to set
the zero point.
Print
Sends the current
value to the RS232
port if the
Print
Setup
→
Assignment
→
Demand menu is
enabled.
Function
Initiates an
application mode.
Tare
Performs a tare
operation.
Secondary
Function
(Long Press)
Off
If the terminal is
on, press to power
off.
Units
Changes the
weighing unit.
Mode
Changes the
application mode.
Menu
Enters the user menu.
Shows a tare value in
application modes.
Menu Function
(Short Press) Yes
Accepts the
current setting on
the display or
selects a sub-
menu or menu
item.
No
Advances to the
next menu or menu
item.
Rejects the current
setting on the
display and
advances to the
next available one.
Back
Moves back to the
previous menu
item.
Exit
Exits the user menu.
Aborts a calibration in
progress.
Exits when displaying
totalization result or
under and over value
in check mode.
Notes:

Short Press: press less than 1 second.

Long Press: press and hold for more than 3 seconds.
.