EN-12
Defender 3000 Indicators
2.3.1.3 i-DT33XW
1.
Turn the two knobs (circled) on each side of the indicator to disassemble the bracket.
2.
Remove the six hex head bolts from the rear housing of the indicator.
3.
Open the rear housing.
4.
Close the housing and re-install the bolts after finishing internal connections
Note:
The bolts
should be tightened to 2.5 N•m (20-25 in-lb) torque to ensure a watertight seal.
Summary of Contents for Defender 3000
Page 1: ...DefenderTM 3000 Indicators Instruction Manual i DT33P i DT33XW Manual_DT33 Indicators_V1...
Page 2: ......
Page 59: ......
