EN-6
Analyzer and Bench Meter
Conductivity electrode condition
(
a-AB33M1, a-AB33EC)
Calibration result: within ± 20%
of the set cell K value.
Calibration result: out of ± 20%
of the set cell K value.
Electrode condition is good.
Electrode needs cleaning.
10.
First measurement channel (a-AB33M1)
Note
: a-AB33M1 supports dual channel measurement, other models only
support one measurement channel.
11.
Temperature
: touch to switch between MTC and ATC temperature.
12.
Measurement mode area
: touch to switch between different pH and
conductivity measurement modes.
PH, mV, ORP
(
a-AB33M1, a-AB33PH and a-AB41PH);
EC, TDS, SAL (Salinity), RDS (Resistivity)
(
a-AB33M1, a-AB33EC);
13.
Second measurement channel (a-AB33M1)
Note
: a-AB33M1 supports dual channel measurement, other models only
support one measurement channel.
14.
Beaker icon
: touch to recall measurement data.
15.
User ID icon
: touch and then press the
or
button to select user by
user ID.
Touch the
Menu
icon
to enter the following menu:
16.
Setup
: touch to enter parameter setup menu.
17.
i-Steward
: touch to enter electrode condition menu.
18.
Settings
: touch to enter meter's setup menu.
Note
: when you enter the three menus introduced above, touch the related
sub-menu items to continue settings.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
