Hay Runner™ Hay Rake
7
Ogden Metalworks, Inc. — 217-582-2552
2.4 General Safety Instruction
The owner/operator is responsible for the SAFE
use and maintenance of the wheel rake. Make sure
anyone who is operating, maintaining, or working
around the wheel rake is familiar with the operating
and maintenance procedures and related SAFETY
information contained in this manual. This manual
will take you step-by-step through your working
day and alerts you to all good safety practices that
should be used while using the wheel rake.
In addition to the design features of the wheel
rake, including safety signs, accident prevention is
dependent upon the awareness, concern, prudence,
and proper training of the people involved in the
operation, maintenance, and storage of the wheel
rake.
These general safety instructions apply to the overall
use and maintenance of the wheel rake.
In addition to this safety section, also refer to
safety messages and instructions in each of the
appropriate sections of this manual.
More specific instructions on safety are found in the
operation, transporting, maintenance, and storage
sections of this manual. Refer to these sections
before performing any of these tasks.
WARNING
Failure to comply with
the following safety
instructions could result in serious injury and
possibly even death if they are not understood
and followed.
Provide User with Literature
The wheel rake’s owner must provide
operator instructions to anyone using the
wheel rake before use, and at least annually
thereafter. Refer to “2.10 OSHA Training
Requirements” on page 8.
Stay Clear
Clear the area of people, especially small
children, before using the wheel rake.
Under no circumstances should young children
be allowed to work with or around the wheel
rake.
Crush Hazard
Hydraulic or mechanical failure can allow a
wing to drop suddenly without warning.
Do not allow anyone to walk under or stand near
a raised rake arm.
Impaired User Hazard
Do not attempt to assemble,
operate, or maintain this wheel rake
under the influence of drugs or alcohol. Consult
your doctor before using this wheel rake while
taking prescription medications.
Fall or Crush Hazard
Do not allow anyone to ride
on the tractor or the wheel
rake. Falling or crushing hazards could result in
severe injuries or death.
No Unauthorized Modifications
Do not modify the wheel rake or its
safety devices. Do not weld on the
unit. Unauthorized modifications may affect the
unit’s function, or create safety hazards.
Damaged Parts Hazard
Do not use the wheel rake if any parts
are damaged. If the wheel rake is
believed to have a defect which could cause it
to work improperly, immediately stop using it
and remedy the problem before continuing.
Fall Hazard
Do not use the unit as a work
platform. Do not stand on top of the
unit at any time. Do not ride on the unit or allow
others to ride on it.
CAUTION
The following safety
instructions are
provided to help prevent potential injury. Not
following these instructions may lead to injury.
Personal Protection Equipment
When using this wheel rake, wear appropriate
personal protective equipment. This list may
include, but is not limited to:
• Protective shoes with slip resistant soles
• Protective eyewear
• Protective clothing and gloves
• Hearing protection
Summary of Contents for RCR812
