Ofs Edward Jones BOA, Assembly Instructions Manual

Page: 6 / 14

6 ofs.com imagine a place® 800.521.5381 Assembly instructions
E5 BOA assembly
Materials
Credenza assembly
1. Remove top drawer from pedestal. Drawer has to be extended all the way out first.
2. Position mini-fix bolts on worksurface into the mini-fix cams on wing end. Rotate mini-fix
cam CLOCKWISE to tighten the worksurface to wing end.
3. Secure worksurface to pedestal with screws (HK-15). Screws start from the underside of the
case spacer in the upper section of the pedestal.
4. Re-install the drawer.
Assembled credenza view on page 7.
INSTRUCTIONS
DETAIL A
SCALE 1 : 2
SHIPPING KEY
HK-15, QTY 8 OF #8 X 1.5"
QUAD PAN HEAD SCREWS
UNPACK & POSITION LATERAL FILE PEDESTAL
(E5-3022MFC) NEAR FINAL LOCATION
REMOVE RED SHIPPING KEY. •
INSTALL CORE/KEY (LOCATED INSIDE •
THE PEDESTAL).
LOCATE HK-15 (USED LATER TO ATTACH •
WORKSURFACE).
RE-INSTALL DRAWER FRONT PULLS •
FACING OUTWARD.
LEVEL THE PEDESTAL. •
Rev: Dwg:
HK-15
#8 x 1.5" Quad pan head screws
Quantity: 8
HK-15 screws go through these
pre-drilled holes to attach the
pedestal to the worksurface.
Mini-fix cam. Triangle on cam
must be pointing towards the
mini-fix bolt to put together.
To remove the drawer you have to push
down (for the right side) and pull up
(for the left side) on the tab at the same
time while continuing to pull the drawer
away from the pedestal.
Case spacer
Detail H
Detail I
Detail G