12
ofs.com
imagine a place®
800.521.5381
Assembly instructions
E5 BOA assembly
Detail M
Detail N
Materials
Desk assembly - part 2: attaching worksurface
1.
Align MOD-EZ bolts on the underside of the worksurface with the MOD-EZ clips on the end
panel. Slide the worksurface in place. There should be a 2" overhang on the approach side of
the worksurface.
2. Once the worksurface is in the desired location, attach L-brackets with the left over HK-10
screws. Attach the pedestal to the worksurface with HK-15 screws.
3. Re-install drawers.
4. Put adhesive cam covers over any mini-fix cams once everything is complete.
INSTRUCTIONS
DETAIL A
SCALE 1 : 2
SHIPPING KEY
HK-15, QTY 8 OF #8 X 1.5"
QUAD PAN HEAD SCREWS
UNPACK & POSITION LATERAL FILE PEDESTAL
(E5-3022MFC) NEAR FINAL LOCATION
REMOVE RED SHIPPING KEY.
•
INSTALL CORE/KEY (LOCATED INSIDE
•
THE PEDESTAL).
LOCATE HK-15 (USED LATER TO ATTACH
•
WORKSURFACE).
RE-INSTALL DRAWER FRONT PULLS
•
FACING OUTWARD.
LEVEL THE PEDESTAL.
•
Rev:
Dwg:
HK-10
L-bracket
HK-15
#8 x 1.5" Quad pan head screws
The worksurface has a routed
line on the underside, which
lines up with this edge on the
back panel. Reference page 8.
HK-15 screws will go through these
pre-drilled holes to attach the pedestal
to the back panel and worksurface.
Mod-EZ clip
Already installed
Side view - 2"
overhang when
assembled
Case spacer
Summary of Contents for Edward Jones BOA
Page 1: ...Edward Jones BOA assembly...
