INSTRUCTIONS
* With top upside down on a protective surface
install both Duofoil standoffs and the runoff support
(Trifoil column, Duofoil legs, Runoff end panel)using
the instructions & hardware supplied with each item.
* Aligning the holes in the mounting plates with the
pre-bored holes in the top. Position the wire cavity so
that it faces the knee space of the top.
* The Duofoil pieces will be rotated at a 45 angle
Dwg:
Rev:
2567INS - PAGE 1
ELEVATED RUNOFF TOP INSTALLATION
* Measure the center to center distance
of the mounting studs on the Duofoil standoffs.
* This measurement will be used to bore the
mounting holes in the top of the low height
cabinet in the next step.
Center line of top
XX
PART # 1699910
INSTRUCTION SHEET # 2567INS
ELEVATED RUNOFF TOP
INSTALLATION INSTRUCTIONS
APTOS
CENTER LINE OF TOP
XX
3. The Duofoil pieces will be rotated at a 45 angle.
4. Measure the center to center distance of the
mounting studs on the Duofoil standoffs.
5. This measurement will be used to bore the
mounting holes in the top of the low height
cabinet in the next step.
1. With top upside down on a protective surface install both
Duofoil standoffs and the runoff support (Trifoil column,
Duofoil legs, Runoff end panel) using the instructions &
hardware supplied with each item.
2. Aligning the holes in the mounting plates with the pre-bored
holes in the top. Position the wire cavity so that it faces the
knee space of the top.
