PART # 1698199
INSTRUCTION SHEET # 2566INS
WALLMOUNT STORAGE & TACKBOARD
INSTALLATION INSTRUCTIONS
CASEGOODS
1. After cabinets are assembled and leveled in desired location, use a
carpenter’s level to draw a line where the top of the wallmount storage
or tackboard will be.
2. The line will be either 38.75" above a worksurface height cabinet or 46"
above a low height cabinet.
3. Draw a second line 3 inches lower than the first line for the wall unit or
upper tackboard wall bracket.
4. If mounting a tackboard under a wall unit, draw an additional line 17.5"
below the first line.
5. Draw last line for lower tackboard wall brackets 35" lower than first line
for worksurface height cabinets or at 40" for low height cabinets.
6. Position the wall brackets (DETAIL B) so the bottom edges are on lines
and are also positioned so they will line up with the brackets that are
mounted onto the back of the panels. (A small level is included and can
be snapped onto the wall bracket, to aid with installation (BRACKET B).
Mark the hole locations.
7. Drill holes into the wall where marked and fasten the wall brackets.
Hardware is provided, but may not be appropriate for your wall type. A
professional contractor should determine the best attaching hardware
for each specific application.
8. Remove the small level from the wall brackets once they are attached to
the wall.
9. Hang tackboards onto the wall brackets first. Then hang wall units.
Wall Bracket
Pencil Line
Cabinet
Mounted
Portion of
Brackets
Wall Mounted
Portion of
Brackets
Small level snaps
in place here
WORKSURFACE HEIGHT
LOW HEIGHT
TACKBOARD WITH
NO WALL UNIT
TACKBOARD WITH
NO WALL UNIT
TACKBOARD UNDER
WALL UNIT
TACKBOARD UNDER
WALL UNIT
40
68 1/4
3
46
38.75
3
35
17.5
