OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
7
The on-screen display controls the temperature, motor, and timer for the At-
mospheric Consistometer. At the bottom of the screen is a series of buttons.
The
Real-Time Data
button returns you to the main screen, which shows the
Bath Temperature, Temperature Setpoint, and the two timers.
The
Test Setup
button takes you to the Test Setup screen where you can
create advanced temperature profiles. See page 11 for more information.
The
Calibrate
button takes you to the Calibration screen where you can cali-
brate the various instruments in the Consistometer. See page 9 for more
information.
The
Utilities
button takes you to the Utilities screen where you can set the
temperature units (°F or °C).
The
Start Motor
button starts the motor. Press the
Stop Motor
button to stop
the motor.
The
Start Cooling
button opens the cooling valve and allows cooling water
to circulate through the bath. Press
Stop Cooling
to close the valve and stop
the flow of water.
The
Start Heating
button turns on the heater. Press the
Stop Heating
button
to turn the heater off.
On-Screen
Display
