Offroad Animal
RS-TLC-200-15-ASM0
2015+ Toyota Landcruiser 200 Series
Fitting Instruction
Rock Sliders
REV B
13/5/20
Page
9
of
30
5.
Insert cable tie in a loop through center of offset type
nut plate, as shown.
6.
Insert nut plate through rectangular hole in chassis
whilst holding the cable tie in your hand.
7.
Using cable tie pull nut plate against chassis. Manipulate
position of nut plate to align M6 threads with holes in
the chassis, A screwdriver or small punch can greatly
assist this process.
TOOLS REQUIRED
Cable Tie
Small screwdriver or punch
FASTENERS