Offroad Animal
RS-TLC-200-15-ASM0
2015+ Toyota Landcruiser 200 Series
Fitting Instruction
Rock Sliders
REV B
13/5/20
Page
12
of
30
14.
Fit one M6 Button head screw and to the rear nut
plate (inline type).
15.
Holding the cable tie, insert the nut plate through the
hole in the chassis.
16.
Position the screw in the corner of the square hole,
and snug down the bolt head using 4mm hex key.
17.
Rotate nut plate using cable tie to align the other M6
thread with the opposite corner and fit M6x20 Button
head screw.
18.
Tighten both screws with 4mm Hex key.
19.
Cut and discard cable tie once secured.
TOOLS REQUIRED
4mm Hex Key
Side cutters
FASTENERS
2x M6x20 Button head bolt