Officine Gullo BBS4EMU, Instructions For Installation And Use Manual

Page: 12 / 16

Officine Gullo 12
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a
dry cloth. Do not use abrasive or corrosive detergents.
All residues of food must be removed from the hotplate with the proper spatula. The surface must be cleaned well
and then greased with a film of vegetable oil. Remove the drip pan, empty it and wash it carefully.
General cleaning guidelines:
Wash surfaces gently with a soft damp cloth; use a neutral liquid soap with water for daily cleaning. Rinse completely
with water, dry any overspray. Never use an abrasive material such as a brush or scouring pad to clean surface. The
use of abrasive cleaners, cleansers or disinfectants will damage the surface finish and void the warranty.
We also recommends the general practice of spot testing all cleaning agents on an inconspicuous area prior to
applying.
We suggest a semi-annual wax routine using a high quality clear carnauba paste wax to extend the life of a living
finish. This will keep the finish close to its original form and minimize the appearance of use. The use of polishing
agents can damage finish and void the warranty.
Note that prolonged contact with certain items such as citrus fruit juice, salt, vinegar, mustard, pickles, mayonnaise,
anti-bacterial soap and wines on your surface for prolonged periods will also alter all surface finish.
NEVER USE:
• Steel wool pads
• Bleaches containing hypochlorite
• Silver dip cleaners or polishes of any type.
Cleaning burnished brass surfaces
The antiquing finish of the surface (Burnished Brass) is the result of natural oxidation that has been accelerated and
it is a “living finish”. Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not
cared for properly.
The unique characteristic of these finishes is that they wear and age over time. Essentially, the finish replicates what
nature would do to the surface material naturally when exposed to the environment.
These products will generally tend to darken slightly on the areas that are infrequently touched and lighten or highlight
on the areas that are contacted on a consistent basis. Soaps, acidic fluids, and astringent cleaners can damage
the finish. Avoid using abrasive pads, sponges, or cloths to clean the product. Do not allow water spots to dry on.
Cleaning chromed brass surfaces
This finish is achieved by chrome plating solid brass and it is a “living finish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.
This durable finish will not change if the general cleaning guidelines are followed.
Please follow the general cleaning guidelines to keep this finish close to its original form and minimize the appearance
of use.
Cleaning nickeled brass surfaces
This finish is achieved by nickel plating solid brass and it is a “living finish”.
Living Finishes have NO PROTECTIVE COATING so they can be scratched or scuffed if not cared for properly.