Officine Gullo BBS4EMU, Instructions For Installation And Use Manual

Page: 9 / 16

INSTALLATION INSTRUCTIONS
This appliance is manufactured by OFFICINE GULLO S.r.l
Headquarters and factory
50012 Antella - Bagno a Ripoli (FI) Italy
via della Torricella, 29, - Tel. +39 055 6560324
In the US call (800)-781-7125
Home page http:// www.officinegullousa.com
E-Mail: info@officinegullousa.com
Keep the appliance area free and clear from combustibles.
Do not obstruct the flow of combustion and ventilation air.
This manual shall be retained for future reference.
The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our
sales conditions.
BEFORE YOU BEGIN
The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,
maintenance and suitable operation of the product. The manufacturer further declines all responsibility for injury due
to negligence and the warranty of the unit automatically expires due to improper maintenance and/or installation.
BEFORE YOU BEGIN: It is advisable to test run the oven before installation.
BEFORE STARTING please read this entire document and ensure you are fully conversant with the requirements and
limitations.
ELECTRICAL INSTALLATION
WARNING : All electrical work must be performed by a qualified electrician.
Please ensure that the appropriate electrical codes or prevailing local building codes and ordinances are adhered
to.
Ensure that the electricity supply is disconnected at source. Do not use an extension cord or adapter plug with this
appliance.
This appliance must be grounded. Connect to a properly grounded branch circuit, protected by an appropriate
circuit breaker.
TECHNICAL ELECTRICAL DATA TABLE
DIMENSIONS
cm
POWER SUPPLY
Power max
kW
Absorbition
max A
Power supply
cable
BBS4EM 40x70x29 h
230Vac (110+110)
50/60 Hz
6 26,09 3 x 4 mm²
INSTALLATION INSTRUCTIONS
This appliance is manufactured by OFFICINE GULLO S.r.l
Headquarters and factory
50012 Antella - Bagno a Ripoli (FI) Italy
via della Torricella, 29, - Tel. +39 055 6560324
In the US call (800)-781-7125
Home page http:// www.officinegullousa.com
E-Mail: info@officinegullousa.com
Keep the appliance area free and clear from combustibles.
Do not obstruct the flow of combustion and ventilation air.
This manual shall be retained for future reference.
The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all the other cases considered in the items of our
sales conditions.
BEFORE YOU BEGIN
The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation,
maintenance and suitable operation of the product. The manufacturer further declines all responsibility for injury due
to negligence and the warranty of the unit automatically expires due to improper maintenance and/or installation.
BEFORE YOU BEGIN: It is advisable to test run the oven before installation.
BEFORE STARTING please read this entire document and ensure you are fully conversant with the requirements and
limitations.
ELECTRICAL INSTALLATION
WARNING : All electrical work must be performed by a qualified electrician.
Please ensure that the appropriate electrical codes or prevailing local building codes and ordinances are adhered
to.
Ensure that the electricity supply is disconnected at source. Do not use an extension cord or adapter plug with this
appliance.
This appliance must be grounded. Connect to a properly grounded branch circuit, protected by an appropriate
circuit breaker.
TECHNICAL ELECTRICAL DATA TABLE
9
Officine Gullo